Labcut 350 Abrasive/Diamond Cutting Machine

A high powered manual cutting machine using 350mm/14in diameter cutting wheels.

 

Features

  • Cutting ferrous/ non ferrous/ ceramic materials with the 350mm/14in dia. wheel

  • floor standing models

  • Internal recirculating coolant tank

  • Side lever for cutting raise/lower

  • Side access ports for long bars

  • RH & LH quick lock vices

This is a larger version of the Labcut 250 which has increased vice holding capacity and a substantially increased motor power. Cutting wheels both abrasive and diamond up to 350mm/14in diameter can be used for cutting the larger material samples. The cutting is carried out manually using an adjustable side lever. A hydrocheck is fitted for controlled operation irrespective of user. The machine includes a coolant circulation system for wet cutting.


Cutting Head
The 32mm/1 1/4in diameter spindle is belt driven by a powerful 5.5kW/7.5HP 3 Phase motor. The long life sealed spindle bearings do not require lubrication. The cutting head is lowered using an adjustable side lever. A hydrocheck attached to the cutting head can be used to ensure controlled, but adjustable, cutting pressure for different users. A variable stop limits the downward stroke of the cutting head. Abrasive or Diamond Cutting Wheels from 250/10in to 350mm/14in diameter can be fitted. The wheel speed is set at 2500 rpm; other belt and pulley combinations give different wheel speeds for particular applications.
 

  • Interior of the cutting machine……

  • RH & LH vices with quick lock clamps

  • Hydrocheck for controlled pressure cutting

  • Flexible coolant nozzles

  • Cutting head end stop

  • Cutting blade- abrasive, diamond, carbide – with variable speed option


Work Table
The work table has T slots for fitting the 2 quick lock vices. The vices have 95mm/3 3/4in capacity. The side access ports in the canopy can be used for introducing long bars of maximum size through the vices.


Electronics
The electronics are contained in a compartment mounted on the rear panel. The front control panel has switching for the various machine functions. The canopy is interlocked by a timed safety switch and cannot be opened whilst the wheel is running. It has a large front viewing windows and 2 side windows. Access ports on both sides of the canopy are provided for cutting long bars of material.
 
Coolant Circulation
The machine can be used for wet or dry cutting. A coolant tank is located in the base cabinet. The 55l/min circulation pump ensures adequate supply of coolant in the cutting area. Flexible coolant jets are provided for directing the coolant as required.
 
The machine generally complies with the European CE standards.

Specification

General 
Cutting: Manual side lever - adjustable position
Cutting Pressure: hydrocheck fitted for constant
cutting pressure - adjustable
 

Cutting Head:
Spindle Diameter: 32mm/1 1/4 in dia
Drive Motor: 5.5KW / 7.5HP
Wheel speed: 2500 rpm, polychain drive
Wheel diameter: up to 350mm/14in

Work Table
T-Slot work table for securing vices
Vices: 2 Quick-lock vices
capacity 95mm/3 3/4in

Coolant Circulation
17l/4.5 gal Coolant Tank in base cabinet
55l/min circulation pump
Flexible coolant jets with wash down hose
 
Electrical
Front Control Panel with following functions
Motor ON / Coolant ON / Light ON/OFF / Emergency Stop
 
Dimensions & Weight
Size: 650mm/25.6in width x 760mm/30in depth x 1420/59in height
Weight: 240 Kg/ 528lbs

Ordering Information
 
8-035-001-00 Labcut 350 Cutting Machine, 3 phase 380-415V 50 Hz
8-035-002-00 Labcut 350 Cutting Machine, 3 phase 208-220V 60 Hz
8-035-003-00 Labcut 350 Cutting Machine, 3 phase 460V 60 Hz
7-035-200-00 Pneumatic vices (RH) c/w regulator & switch
7-035-201-00 Pneumatic vices (LH) c/w regulator & switch
7-035-490-00 Inverter for Wheel speed variation incl. cabinet and
controls